Network Pro

Every port, explained

Network Pro reads each switch and router's interfaces over SNMP and shows every port: up or down, speed, errors and discards, what's plugged in, and how busy it is. It flags the ones that need a look, such as ports stuck at 100 Mb, error counters climbing, or an uplink running near its limit, and alerts on the ones you care about.

A map that draws itself

Using LLDP and CDP, the neighbour information your switches already share, Uplivra draws the network map and keeps it current. It also learns what "sits behind" what, so when a core switch goes down you get one alert for the switch, not fifty for everything behind it.

Traffic flows on every device page

Point NetFlow, IPFIX or sFlow from your routers and firewalls at the collector. Uplivra works out which device sent each record, and each device's page gets a Traffic flows section: throughput over the last hour, 6 hours or day, top applications, and the busiest conversations. No separate tool, no hunting for the right exporter.

The Traffic flows page shows the same across the whole network, by exporter and interface, with top talkers and destinations.

Also included

• IP address management: subnets, which addresses are in use, and addresses seen outside any known subnet.
• Configuration backups: saved router and switch configs with a line-by-line comparison of what changed.
• Path quality: latency and loss along the route to important services.

Pricing

+$2 per device per month, only for the devices you choose, such as your switches, routers and firewalls. See pricing.